FxPro Raw+ Trading Conditions — Measured | FxPro Kenya
The hard numbers behind a Raw+ account, read straight from FxPro’s own MetaTrader 5 feed: contract specs, order rules and the 2,105 tradable instruments — last read 2026-09-04.
Open FxPro Account →Trading conditions are the part of a broker's offer you can check most directly: every number on this page has a field in the terminal behind it, and reading those fields yourself takes minutes rather than trust. The contract specification for each instrument carries the minimum and maximum order, the lot step, the contract size and the tick value; the account itself carries the stops level and the risk levels. The one figure you cannot read off a field is execution speed — that has to be timed, and timed more than once, because a single fast fill is an anecdote while a set of fills is a measurement. Both kinds appear below: the fields as read from FxPro's own MetaTrader 5 feed, and the fill timings from real market orders placed at three different sizes.
Contract specifications (measured)
| Instrument | Min lot | Max lot | Lot step | Contract size | Tick value (USD) | Digits |
|---|---|---|---|---|---|---|
| EUR/USD | 0.01 | 500 | 0.01 | 100,000 | $1.00 | 5 |
| GBP/USD | 0.01 | 500 | 0.01 | 100,000 | $1.00 | 5 |
| AUD/USD | 0.01 | 500 | 0.01 | 100,000 | $1.00 | 5 |
| USD/CAD | 0.01 | 500 | 0.01 | 100,000 | $0.72 | 5 |
| USD/JPY | 0.01 | 500 | 0.01 | 100,000 | $0.64 | 3 |
| XAU/USD (Gold) | 0.01 | 500 | 0.01 | 100 | $1.00 | 2 |
Read live from FxPro’s MT5 Raw+ account. ‘Tick value’ is the cash change per minimum price increment, per standard lot, in USD — what one point is worth to your P&L. Last read 2026-09-04.
Order rules and account risk
- Minimum order 0.01 lot and maximum 500 lots, in 0.01-lot steps (0.01 lot = 1,000 units on an FX major).
- No minimum stop or limit distance (stops level 0) — you can place a stop-loss or take-profit right next to price, which suits scalping and expert advisors.
- Margin call at 10% and stop-out at 0% margin level, as measured on the Raw+ account — confirm the live levels in your own terminal before risking capital.
- Contract size 100,000 units per lot on FX majors and 100 oz per lot on gold.
Execution speed and slippage (measured)
| Instrument | Order size | Avg fill | Max fill | Avg slippage (pts) | At price / better / worse | Fails |
|---|---|---|---|---|---|---|
| EUR/USD | 0.01 | 89 ms | 94 ms | 0.0 | 3 / 0 / 0 | 0 |
| EUR/USD | 0.1 | 78 ms | 78 ms | 0.0 | 3 / 0 / 0 | 0 |
| EUR/USD | 1.0 | 89 ms | 94 ms | 0.0 | 3 / 0 / 0 | 0 |
| GBP/USD | 0.01 | 83 ms | 94 ms | 0.0 | 3 / 0 / 0 | 0 |
| GBP/USD | 0.1 | 83 ms | 93 ms | 0.0 | 3 / 0 / 0 | 0 |
| GBP/USD | 1.0 | 88 ms | 94 ms | 1.0 | 1 / 0 / 2 | 0 |
| XAU/USD (Gold) | 0.01 | 83 ms | 93 ms | 5.667 | 1 / 0 / 2 | 0 |
| XAU/USD (Gold) | 0.1 | 141 ms | 250 ms | -4.333 | 2 / 1 / 0 | 0 |
| XAU/USD (Gold) | 1.0 | 83 ms | 94 ms | 9.667 | 1 / 0 / 2 | 0 |
Measured by placing real market orders on the Raw+ account and timing each fill; slippage is the price difference (in points) between the click and the fill, and ‘at price / better / worse’ counts how those fills landed. Small sample (a few round-trips per size) — indicative, last read 2026-06-24.
Instrument universe (measured)
FxPro’s live MT5 server carries 2,105 tradable instruments — the real count, not a rounded marketing figure. The major tradable asset classes:
| Asset class | Instruments |
|---|---|
| Stocks | 1,854 |
| Forex | 75 |
| ETFs | 46 |
| Futures | 41 |
| Cryptos | 37 |
| Spot | 22 |
| Metals | 12 |
Counted directly on the trading server. Availability of a specific instrument can vary by account and region.
Read the specification, do not read about it
Every field in the contract table above exists in your own terminal, a couple of clicks away from the instrument. Minimum and maximum order, lot step, contract size, tick value, digits: these are server properties rather than opinions, and they read the same for anyone looking at the same account type.
Read them before the first order rather than after the first surprise. The two that catch people out are the contract size, which is 100,000 units per lot on an FX major and a different figure on metals, and the tick value, which is what a single point is worth to your profit and loss on a standard lot.
Because these fields are stable, one careful reading has a long shelf life. Put them in the same sheet you use for spread readings and overnight charges, and you never have to look them up in the middle of a decision.
Timing your own fills
Latency is the only figure on this page that cannot be read from a field. Measuring it means placing orders and timing them: a demo account, the click time, the fill time, and enough repetitions that an average is worth writing down.
Do it at more than one order size. Our own timings were taken at 0.01, 0.1 and 1.0 lots and reported per size rather than pooled, because pooling hides any size effect — and a size effect is precisely what a trader planning to scale up wants to know about.
Record the misses along with the hits. A run that reports only the fast fills is a highlight reel; how many orders filled at price, better and worse belongs in the result, and so does the count of anything that failed to fill at all.
What a small sample can and cannot say
Our execution figures come from a few round-trips per size and are published as indicative for that reason. That is a statement of fact rather than modesty: a handful of fills can show that the mechanism works and roughly where the timings sit, and it cannot show what happens on a bad afternoon.
The same ceiling applies to your own run, only lower. Treat a short test as a smoke test — did the order fill, did the stop attach next to price, did anything reject — and treat typical latency as a question that needs a longer run with a date attached to it.
That is the difference between a number and a measurement. A number is what you saw; a measurement is what you saw, how many times, when, and under what conditions. Every figure published on this page carries the second form, and the date on which it was read.